EN
AR
BG
HR
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
PL
PT
RU
ES
SV
TL
IW
ID
LV
SR
UK
VI
GL
HU
TH
TR
AF
MS
SW
GA
CY
IS
BN
BS
NE
Waterproof Pogo Pin Connector 2.54mm Pitch
Product Model: RM1501
Daily output: 50,000 sets
Certification:ROHS | REACH | ISO
Custom-made products
E-mail: [email protected]
- Overview
- Inquiry
- Related Products
1、Waterproof Pogo Pin Connector 2.54mm Pitch
Note:
- Material and coating conform to ROHS and REACH standards
- @Key inspection dimension
| Mechanical | |
| Contact force | 40g士20g at 0.8mm working storke Full storke 1.0mm |
| Life test | 10,000 cycles |
| Holding force | 10N/Pin Min |
| Electrical | |
| Rated voltage | DC 5V |
| Rated current | 2A Max |
| Contact resistance of spring pin | 20 milliohm Max |
| Environmental performance | |
| Operation Temperature | -40℃ to +85℃ |
| Salt Spray | 48H |
| Steam aging: | 8H |
Advantage:
--Core customization capabilities
Structural design and process adaptation
Supports customization of special-shaped structures such as round, square, fan-shaped, and runway-shaped to meet the installation requirements of special scenarios. The assembly methods include SMT patches, DIP plug-ins, bending welding, and overmolding.
Key inspection dimensions (such as needle stroke and adsorption force tolerance) can be accurately controlled through technologies such as concave and convex groove positioning and sealing ring reinforcement.
--Material and environmental certification
RoHS/REACH standard coating materials are used to ensure corrosion resistance and environmental compliance.
The needle tube is made of beryllium copper/stainless steel, and the spring is made of high carbon steel to ensure that the compression life is ≥10,000 times and the contact impedance is ≤20mΩ.
--Performance verification system
Dynamic impedance detection: Each needle is verified by a fully automatic dynamic tester to ensure stable electrical performance.
Optical size inspection: 100% optical inspection in three stages of material, electroplating, and assembly, with tolerance controlled within ±0.01mm.
