Pogo Pin Charger

Dongguan Xinteng Electronics Co., Ltd. is one of the most reliable manufacturers and suppliers of pogo pin charger in China, featured by quality products and good service. Welcome to wholesale bulk durable pogo pin charger in stock here from our factory. Also, customized service and OEM&ODM service are available.

This DIP type pogo pin equipment is equipped with low contact voltage and high stability, precision contact point ability to maintain stability during the delivery process, and prevent the occurrence of signal loss due to drying. It has a low contact voltage, a precise cable construction, a confirmation signal, and a high quality quantity, low wear, and a high demand for high speed delivery.

The equipment is equipped with a high-speed network with low input consumption, ensuring the pogo pin is equipped with a fixed number of communication devices, and is also suitable for high-speed testing and communication model connection equipment.

The pogo pin charger needle has a diameter of 1.0mm and an overall height of 9.5mm. The gold-plated brass layer provides corrosion resistance and stability.

In the design, the compression amount is generally 2 inch 3 of the total stroke; too little pressure and insufficient forward force will lead to impedance instability; too much pressure will damage the pipe mouth and lead to poor card PIN.

In the process of assembly, we should also pay attention to keep the pipe mouthaway from the force, so as not to hit the pipe mouth and cause PIN card.

Battery contacts paired with POGOPIN or FPC gold fingers should not have dirt, oxidation, etc.

Gold Plating Thickness
Gold plating thicknesses include: Thick gold (0.3μm-3μm): Suitable for general, low-current applications, offering good conductivity and oxidation resistance.
Medium gold (3μm-5μm): Suitable for medium-current applications, offering longer service life and enhanced wear resistance.

High gold (5μm-10μm): Suitable for high-current or high-frequency applications, effectively reducing contact resistance and providing enhanced corrosion and wear resistance. It is often used in demanding connection applications. The choice of gold thickness depends on the specific application; generally, thicker gold tends to be more expensive.

Gold Plating Methods

Chemical gold plating: This method uses a chemical process to deposit a gold layer. It is suitable for small-batch production and applications requiring high precision. The resulting gold layer is more uniform, but may have slightly lower wear resistance.

Electroplating: This method uses an electric current to deposit gold onto a metal surface. It is suitable for large-scale production, offers controllable gold plating thickness, and exhibits good wear resistance.

Hard gold plating: Typically used in applications requiring high wear resistance. This gold plating is harder than standard gold, can withstand more plugging and unplugging cycles, and is suitable for high-frequency applications.

Gold Alloy Selection

Pure gold plating: Offers excellent conductivity and corrosion resistance, but is more expensive. Suitable for high-precision, high-frequency, and high-stability applications.

Gold alloy plating (such as gold alloy and gold-nickel alloy): Compared to pure gold plating, gold alloy plating offers superior hardness, wear resistance, and cost-effectiveness. It is typically used in applications requiring higher frequencies and greater wear resistance.

XINTENG has 15 years of research and production, production is a well-known pogo pin manufacturer in China, we have 100+ direct production pogo pin grades, and offer more selections to customers. Of course, we also provide fixed-order solutions, high-quality material production, quality guarantee, and flexible supply for our customers.

Hot Tags: pogo pin charger, China pogo pin charger manufacturers, suppliers, factory, 1mm Pogo Pin, pogo pin 1 27 mm, Pogo Pin Charger, pogo pin high current, spring pogo, Waterproof Pogo Pin