enLanguage
SMD Pogo Pins
video

SMD Pogo Pins

The SMT-type 3A pogo pin has an overall height of 7.50 mm and a tip diameter of 0.90 mm. It has been tested for 10,000 cycles and passed a 48-hour salt spray test. It has a working shock resistance of 70g ± 20g at 1.0mm and a full shock resistance of 1.4mm. The materials and coatings comply with ROHS and REACH environmental standards.
Send Inquiry
Product Introduction

Dongguan Xinteng Electronics Co., Ltd. is one of the most reliable manufacturers and suppliers of smd pogo pins in China, featured by quality products and good service. Welcome to wholesale bulk durable smd pogo pins in stock here from our factory. Also, customized service and OEM&ODM service are available.

 

sMD pogo pins Introduction

 

This SMT-style pogo pin, thanks to its compact size, durability, and stable conductivity, is widely applicable in consumer electronics, industrial testing, and medical devices. With a maximum current carrying capacity of 3A and a rated voltage of DC 12V, a 0.9mm tip diameter, and an overall height of 7.5mm, it is ideal for use in portable medical devices such as blood glucose meters, urine analyzers, and portable ultrasound machines. These devices are compact and frequently carried, placing high demands on the lifespan and stability of the pogo pin. This product's reliability and durability precisely meet these stringent requirements.

 

Product Parameters

 

Product model

RG-1200

Mechanical

Contact force

70g±20g at 10mm working storke Full storke 1.4mm

Life test

10,000 cycles

Electrical

Rated voltage

DC 12V

Rated current

3A Max

Contact resistance of spring pin

50 milliohm Max

Environmental performance

Operation Temperature

-25℃ to +60℃

Salt Spray

48H

Packing

PE bag / reel packing

Material and coating conform to ROHS and REACH standards

 

Product details

 

The internal structure of the SMD pogo pins features an oblique cross-section design with a built-in stainless steel spring. The pin diameter is 0.90mm and the total height is 7.50mm. The pins have been tested for lifespans up to 10,000 cycles and have passed a 48-hour salt spray test. They have a working storke strength of 70g±20g at 1.0mm and a full storke strength of 1.4mm. The materials and coatings comply with ROHS and REACH environmental standards.

11

 

Precautions for using pogo pin

 

  • During the design process, engineering drawings will clearly indicate the compression stroke. Generally, the compression amount is 2/3 inch of the total stroke. Insufficient compression or push force may lead to unstable impedance, affecting connection reliability. Conversely, excessive compression can damage the tube opening, causing pin jamming.
  • During Pogo Pin assembly, special care must be taken to avoid applying excessive pressure to the tube opening, as excessive pressure or impact can deform the opening, leading to pin jamming and affecting connector performance and stability.
  • Furthermore, it is crucial that the battery contacts mating with the Pogo Pin or FPC gold fingers are free of dirt, oxidation, etc. Contaminants can affect contact quality, resulting in unstable electrical connections.

7OL0JACD5YTZ1ZGSU0I

 

How to make pogo pin waterproof

 

  • Pogo pins are inherently waterproof.

Tail seal: The tail of the syringe barrel is sealed with laser welding, resin/glass fiber potting, or riveting to prevent moisture from entering the spring through the barrel.

External seal: The stopper of the syringe barrel is combined with an O-ring or conical seal to form the primary seal when installed in the housing or outer shell.

Labyrinth structure: A "maze" or double-lipped opening is created in the sliding gap between the needle tip and the syringe barrel to reduce the risk of capillary infiltration.

  • Pogo pin connectors are waterproof.

Overmolded integration: The Pogo pin array is encapsulated with the cable or housing, resulting in a smooth appearance and minimal gaps.

Sealing combination: An O-ring + flat silicone gasket + threaded/clip preload creates a maintainable assembly seal.

Pressure balancing: An ePTFE breathable membrane is added to the sealed cavity to mitigate pressure differences caused by temperature differences or water depth, preventing the "water absorption" effect.

Potting protection: Perform local potting (epoxy/silicone gel) on key cavities to turn possible water seepage channels into "dead ends".

 

FAQ

 

Q: How is the life test conducted?

A: Using a plug-and-socket tester, we perform frequent plugging and unplugging at the rated stroke and record the number of failures.

Q: If a customized pogo pin does not meet requirements, can it be modified?

A: Modifications can be made during the prototype phase. Modifications after mass production may require re-tooling and other costs.

Q: How quickly can I get samples for an expedited order?

A: It takes about a week to ship. Expedited orders require an expedited fee, and the parameters must not be complex or irregularly shaped.

Q: What precautions should be taken when pairing pogo pins with FPCs?

A: The FPC gold fingers must be free of oxidation and aligned to prevent misalignment.

Q: Can waterproof pogo pins be submerged in water?

A: IP67-rated pogo pin connectors can be submerged for short periods, while IP68-rated connectors can be submerged for long periods. Use according to the rating.

Hot Tags: smd pogo pins, China smd pogo pins manufacturers, suppliers, factory, Pogo Pins, mini pogo pins, pcb mount pogo pins, pogo pin, pogopins, pogo pin 2mm

Send Inquiry

whatsapp

Phone

E-mail

Inquiry